3 Best Table Saw Blade For Plywood

The most delicate part of art when using plywood is the cutting steps.

To be perfect in your steps, you need to find a table saw blade to help you reduce consumption.

You do not have not worry about the delicate cutting steps because once you have the best plywood table blade saw, it offers the best features.

Below in this guide, you will find the best plywood table saw blade.

DISCLOSURE: TheRuggedRooster.com is reader supported so if you buy any products featured on this site I may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Read my full disclosure here.

1. Freud Ultimate Plywood

What Freud Ultimate Plywood can do/is used for.

This type of blade comprises 4 inputs for cutting wood to enable you to place any table saw.

Premium steel blade body combined with quality to enhance the durability of the blades.

Key specification
• Size – 10 inch
• Teeth – 80 Hi-ATB
• Material- Carbide
• Weight- 1.8 pounds
• Arbor- 55/8
• Model – LU80R010

Features
• Used for deep cuts
• The TiCo HI-Density Carbide makes it premium
• Cuts all kinds of plywood, soft and hard.

Pros
• Any saw is compatible with this blade.
• Plywood is not burnt.
• It can perform perfectly for a long time.
• No damage is left.
• Fine finishes and cuts are made.

Cons
• Over a period of time, it loses its edges.

WHY You Have Included This Freud Blade in The List.
This is because it has compatible with and any saw and does not burn any material.

2. DEWALT Exclusive Miter + Table Saw Blade

What DEWALT Exclusive Miter + Table Saw Blade can do/is used for.

It is used in workshops that have multiple saws. It is also the perfect saw blade for those who would like to bring down concrete buildings

Key specification
• Size – 10 inch
• Teeth – 6oT
• Material- Carbide
• Arbor- 5/8
• Model – DW3106P5D60I
• Weight – 3.22 pounds

Features
• Durability is increased by the High-quality carbide.
• Made of 60 teeth ensuring durability.
• The blade is compatible with both the table saw and miter saw.
• No rust because it is made with carbide tips.

Pros
• Compatible with any table saws.
• They are fast.
• Without trouble, can perfectly work for radial mode.
• Make clean, smooth, and fine cuts.
• Sixty tooth blades are a perfect option for cutting wood.

Cons
• Teeth may bend.
• Overheats over time.

WHY You Have Included This DEWALT Blade in The List.
The DEWALT blade in the top three best plywood table saw blades is because it makes smooth, clean, and fine cuts.

3. Oshlun Fine Finishing Cutting Saw Blade

What Oshlun fine finishing cutting saw blade can do/is used for.

For any electric blade, size is ideal and firm. For all kinds of tasks, it can be used for the best quality. When doing your art and craft tasks, you can cut all plywood.

Key specification
• Size – 8 inch
• Teeth – 64 ATB
• Material- Carbide
• Arbor- 5/8
• Model – SBW-080064

Features
• The maximum speed of 6000 rpm can be resisted.
• With the ATB teeth, a total cutting of 10 degrees is allowed.
• Soft, board wood and hard can be cut.
• For durability carbide tips are include.

Pros
• Powerful and small.
• Cuts made are quick and clean
• Heavy-duty miter saws and table are the perfect combination.
• Its quality is maintained for a long period without any damage.
• On thick and thin wood.

Cons
• Plywood is burnt a little bit.
• Discs may bend with time.

WHY You Have Included Oshlun Fine Finishing Cutting Saw Blade in The List.
This is because it has compatible with and any saw and does not burn any material.

SaleBestseller No. 1
Freud LU80R010: 10" Ultimate Plywood & Melamine Blade
  • Specs: Arbor 5/8", Diameter 10", Grind Hi-ATB, Hook Angle 2°, Kerf .126", Plate .087", Teeth 80
  • Premium TiCo Hi-Density Carbide Crosscutting Blend for Maximum Performance
  • High Alternate Top Bevel (HiATB)Tooth Design produces splinter-free cuts
  • Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish
  • Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.
Bestseller No. 2
KENDO 1-Pack 10 Inch 40T Carbide-Tipped Circular Saw Blade with 5/8 Inch Arbor, Professional ATB Finishing Woodworking Miter/Table Saw Blades for Plywood, Laminate, Ripping Wood
  • DIMENSIONS: 10 Inch (254mm) TCT circular saw blade; max 5300 rpm setting, Arbor size: 5/8 inch(15.88mm); Carbide Teeth: 40T.
  • MATERIAL: Circular saw blades are made of tough carbide to deliver accuracy and resist bending for durable cutting life. Tungsten carbide teeth provide excellent wear and heat resistance providing fast and efficient removal of chips and swarf.
  • FEATURES: Incorporates an ATB (Alternating Top Bevel) offset tooth design, The angle of the tooth scores the surface of the wood in advance of the cut, cleanly cutting the wood fibers before the following teeth remove the chip. This provides for a much smoother cut, with much less chance of splintering the surface of the wood.
  • APPLICATION: Circular saw blades are made of durable Carbide tipped framing blades – delivers accuracy and resists bending.Ideal for cross-cutting softwood, hardwood, plywood, chipboard, multi-board, panels, MDF.
  • QUALITY COMMITMENT: KENDO circular saw blade with high-quality tungsten carbide and inlay teeth brazing technology for higher nail impact resistance and longer cutting life. If for any reason you are not satisfied with your purchase, please contact us.
Bestseller No. 3
Freud LU79R010: 10" Thin Kerf Ultimate Plywood & Melamine Blade
  • Specs: Arbor 5/8", Diameter 10", Grind Hi-ATB, Hook Angle 2°, Kerf .098", Plate .071", Teeth 80
  • Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance
  • High Alternate Top Bevel (HiATB)Tooth Design produces splinter-free cuts
  • Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish
  • Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.
SaleBestseller No. 4
FOXBC 8-1/4 Inch Table Saw Blade 40 Tooth, Replacement for Freud Diablo D0840, DeWalt DWA181440 Finishing Circular Saw Blade, DeWalt DWE7485 Table Saw with 5/8" Arbor, Diamond Knockout
  • 8-1/4 Inch Table Saw Blade 40-Tooth ATB, KERF 0.079", 5/8" Arbor, Diamond Knockout
  • Ultra thin kerf for fast, durable, and clean cuts.
  • Made from high-density tungsten carbide for toughness, wear-resistance, and long life
  • Compatible with DeWalt DWE7485 DCS7485B DCS7485T1 and SKIL SPT99T-01, BOSCH GTS18V 8-1/4 Inch Table Saw.
  • Perfect replacement for DEWALT DWA181440 and Freud DIABLO D0840, D0840X 8-1/4 inch saw blade
Bestseller No. 5
Overpeak 10-Inch Table Saw Blade ATB Ultra Fine Finishing 90 Teeth Wood Cutting Circular Saw Blades
  • ▲Material - OVERPEAK saw blades made of tougher tungsten carbide for up to 5x longer cutting life than other saw blades
  • ▲Low Noise & Cutting Stable - 6 Laser cut expansion slots and 4 Laser-cut stabilizer vents trap noise and vibration, keeping it cool and reducing blade warp
  • ▲Alternate-Top Bevel Teeth - The 10 inch saw blade with unique tooth design provides straight cuts and cutting smoother
  • ▲Machine Use - Framing saw blade is great for circular saw, table saw, miter saw. RPM up to 6000
  • ▲General Usage - The Overpeak 10 inch carbide blade is 90 tooth and suitable for ripping wood, crosscuts wood, plywood, and laminate

So, What’s The Best Table Saw Blade for Plywood?

Below is the top 3 best table saw blade for plywood.

  1. Freud Ultimate Plywood
  2. DEWALT Exclusive Miter + Table Saw Blade
  3. Oshlun Fine Finishing Cutting Saw Blade

If I was to pick just one it would be the Freud Ultimate Plywood.

Because it does not heat and burn the plywood. They are also compatible with any saw.

Last update on 2023-12-10 / Affiliate links / Images from Amazon Product Advertising API