How To Upholster A Chair Seat And Back

DISCLOSURE: TheRuggedRooster.com is reader supported so if you buy any products featured on this site I may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Read my full disclosure here.

There is nothing as disappointing as dealing with a damaged fabric or cover seat in the house.

When it is ripped, stained, or dated, it turns your favourite chair into your worst house furniture.

They are unsightly and disorient the style of your house. Whether the fabrics are damaged or you want to change the colour, you can always do that by upholstering.

We often buy them at high prices, and getting rid of them can be challenging.

Most people prefer to upholster them to restore functionality and beauty.

The only biggest task you must perform is getting the right fabrics and materials for upholstering.

The task is not difficult and can be completed within few hours, a day at most.

Let’s explore how you can upholster your chair seat and back.

What Do You Need To Upholster A Chair?

There are several things that you require before you begin the project.

• Need-nose pliers
• Notepaper and pencil
• Marking pen
• Scissors
• Staple gun
• Strong straight pins
• Sewing machines
• Flathead screwdrivers
• Staples
• Batting
Upholstery fabric
• Chalk
• Tack strips
• Upholstery weight thread
• Fabric glue
• Black fabric for the underside

Step by Step Guideline for the Upholstery

Step 1: Remove the Tainted and Damaged Old Fabric

Now, before you remove the old fabric, it is crucial that you take a photograph of the chair, taking note of the overall details fo

r reference. Carefully remove the old fabric beginning from the back to the front.

Step 2: Replace the Batting

Get rid of the damaged old batting from the chair seat and back. When removing the batting, you should be careful not to damage the springs and webbing plan.

Get the new batting and cover the chair’s seat and back.

Step 3: Layer the New Upholstery and Make a New Pattern

Now that the seat’s batting is firm and steady, you can layer the new upholstery and develop a new pattern.

Your main concentration should be on the grain and pattern. Use the pins to secure the fabric all over the chair as you leave some space for the stapling.

Step 4: Attach the Base Fabric

Using pins and staples, attach the base fabric in a tight and secure pattern for that smooth finish.

Once it’s all secure, you can trim the excess fabric and tuck the extra under the corners. Your focus is the smooth finish.

Step 5: Make a Welt and Leave a Seam Allowance

Using the old pieces as guidelines, you can now make a neat welt and leave some space sewing.

Step 6: Sew the Welt and Attach the Sides

In this step, you will sew all rounds as you attach the sides. Focus on getting a finished edge. Once you are through, attach the backside.

Step 7: Complete the Underside

Get a black breathable fabric and complete the backside using the old fabric as a guideline.

How to Upholster a Chair Seat and Back

Upholstering the chair changes its look and enhances the room’s aesthetic.

As you have seen, it is not a difficult project.

With all the materials, you can begin and get it done within a few hours. It all depends on your speed.