Homes with wooden finish are becoming more common and preferable in the current lifestyle.
Medium-density fiberboard is one of the best house finishes you can consider when designing your floor and interior looks.
The MDF board consists of thin panels made from resin, wax, and wood. Are you in a dilemma to choosing between an MDF board and another floor finish?
Note that you are in the right place for the post to give you all the goods using an MDF board in your baseboard activities.
DISCLOSURE: TheRuggedRooster.com is reader supported so if you buy any products featured on this site I may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Read my full disclosure here.
Why Choose MDF?
1. High Water Resistance
One of the advantages of using a medium-density fiberboard is that it’s designed to resist water.
In areas like kitchen and bathrooms where moisture is expected, buy a special kind of MDF and make your house more comfortable to live at.
Water-resistant MDF can withstand more significant amounts of humidity and moisture, making them perfect for exterior use.
2. Hard to Crack
MDF might be developed out of wood, but it is hard to crack.
The engineering in it makes it resist cracking when one tries bending it.
Instead, it snatches then wraps.
The MDF uses this ability to resist water out of its skin.
3. MDF is Smooth
A perfect house must have a smooth surface and wall finish.
A soft floor feels very comfortable when stepping on.
The masterminds behind the creating of the MDF knew precisely what they were doing because it is the smoothest wooden design you will ever have.
The MDF is distinct from other wooden materials since it lacks the knots and rings on its surface.
4. Easy to Paint
Due to the ideally smooth skin achieved out of engineering, the MDF board is one of the easiest materials to decollate.
It also absorbs the paint, so there is less wastage when decollating on it.
Give your house perfect paint patterns with less quantity of paint you could have used on other materials.
5. Easy to Customize
When buying, you get large boards of the MDF, which you then cut to the required size.
An MDF board is easier to cut, shaped, sanded, and drilled on without spoiling.
This should sound good to you since no matter how complex your floor is, the MDF will get the job done with less wastage.
6. It’s Lighter than Solid Wood
The fact that it is lighter doesn’t mean that it is less effective.
MDF is thinner and vast in size and yet more delicate than its mother source.
The reason behind its weight is because it is made from sawdust and a few binding materials.
7. Resistance to Pests
If your surroundings are covered with ants and other sorts of pests, you need to worry less if an MDF board is your pick.
It is made with chemicals that keep away the pests. It is also made from hardwood trees which are not ants’ favorite.
The MDF is made out of dust from the wood, making it less expensive than its counterparts.
A piece of the MDF might be costly but will cover a large part making it cost-effective.
So, Is MDF Good for Baseboards?
Yes, MDF is good for baseboards.
If its ability to resist water and pest isn’t enough to lighten up your mind, consider the cost efficiency and how easy it is to customize.
The best thing about the MDF is the less wastage when using.