Plate Joiner vs Biscuit Joiner, What’s The Difference? (Explained)

DISCLOSURE: is reader supported so if you buy any products featured on this site I may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Read my full disclosure here.

Since you are asking this question, I assume you are new to woodworking.

You have probably heard the terms biscuit joiner and plate joiner and wants to know the differences in their uses.

So, Plate Joiner vs Biscuit joiner, what’s the difference?

There isn’t much of a distinction between them; they’re just different names for the same thing.

Therefore, in this article, I will tell you the two tools in detail and their review.

Biscuit Joiner or a Plate Joiner?

As I mentioned above, the two are the same thing, but the names vary from region to region.

The tool is called biscuit joiner in the USA. In the UK, you will hear people calling it a plate joiner.

How can you use the tool?

• When you need to join two pieces of wood together, you’ll need to use a biscuit joiner. With the help of a circular blade, the instrument creates a hole for connecting of woods.

• You can do this with plywood, fibreboard, and particleboard. You can use this technique when working with solid wood.

• The alignment of the woods’ edges is another application of the tool. A biscuit joiner is a simple way to make a flash joint in a short amount of time.

• How to use the plate/ biscuit joiner

• Now that you have understood that the tool is the same but different names, I will guide you on using it to get the best results.

• First, arrange the pieces of wood to be bonded so that their grains are all facing the same direction. Ensure that the tree rings on the wood’s edges form an arch, with the open end of the curves facing downward.

• Draw a triangle across the width of the boards to be linked using a pencil. The triangle will serve as a guide for reassembling the boards in their proper placements.

• Make pencil marks along each joint where you will place the biscuit. Spread the boards apart and cut a slot at each mark with a biscuit joiner. Ensure to centre the cuts according to the marks. Apply a small amount of wood glue along the length of the edge to be connected and inside the slots.

• Place the biscuits in the slots of one of the wood pieces. Then, on the second piece of wood, insert the biscuits into their appropriate slots. Allow the pieces of wood to dry while clamped together.

• The boards have to be held together then make markings on both boards to show where it will be cut. This is made for perpendicular connections. Place the two boards parallel on top of each other, with the top of the horizontal board aligned with the line you just drew. Clamp the two boards together in this position, spacing the cuts about 6″ apart.

• Cut slots at the end of the top piece of wood using the biscuit joiner. Cut matching slots in the bottom piece of wood with the joiner in a vertical position. Using biscuits and a small bit of wood glue, assemble the structure. Allow the glue to dry before clamping the junction together.

The review

As you have seen, the tool is essential as it makes work easier.

  1. Boosting your strength

When working on a woodworking project, one of the traits you should strive for is the structure’s strength and durability. Sturdy and long-lasting construction is not only valuable, but it also guarantees the structure’s security.

  1. Projects a professional image

Wood is one of the few materials that can help your project acquire a naturalistic charm. However, this is only achievable if you use the right tools Biscuit joiners’ aid in creating a basic yet distinctive joint that does not detract from the project’s overall appearance.

  1. Create a variety of sizes

You may work on any timber project without worrying about its size if you use biscuit joiners. The tiniest biscuit joiners are a twelfth of an inch in diameter. There are a variety of sizes available, allowing you to do any work effectively. You may receive specialized equipment for your project, no matter how big or small it is.

  1. You can use it for different wood types you can use biscuit on a variety of wood types and size up to medium.
  2. Cut with self-assurance

The tools you employ will always have an impact on how well your project turns out. Biscuit joiners will boost your self-assurance because they properly achieve the size and shape you desire. Furthermore, using this tool is simple because it does not waste wood.

  1. Provides good value for money

By purchasing biscuit joiners from a reputable manufacturer, you may work on various tasks without worrying about changing your tool. However, if your tools withstand severe working circumstances, you must take adequate care of them.

Therefore, using the tool should be on top of your must-have tools for your carpenter toolbox.

Biscuit Joiner vs Plate Joiner, What’s The Difference?

Biscuit joiner and plate joiner are the same tools but different names.

People from the US call it biscuit cutter, while it is called plate joiner in the UK.

Follow the procedure above if you want to use the tool in your home improvements.

From the reviews, I believe you have seen why it is important to invest in this handy tool.

Last update on 2024-03-04 / Affiliate links / Images from Amazon Product Advertising API