What Is A Corner Saw?

A corner saw is a hand-held tool that is used for complex chopping tasks which often comprise of compact bends.

This gadget is efficient for stiff radii and intricate cutting or trimming work.

A corner saw’s blade is fine and slender, enabling the tool to be maneuvered at ease.

On this account, the saw can cut corners, especially in wood.

Due to the simplicity of navigating the saw, it is preferred for making joints and arched contours.

DISCLOSURE: TheRuggedRooster.com is reader supported so if you buy any products featured on this site I may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Read my full disclosure here.

What Is the Primary Use of a Corner Saw?

The principal purpose of a corner saw is to execute accurate and exquisite cuts, while penetrating through wood with its fine blade.

In addition to this, the corner saw is used for clipping wood and other materials such as plastic.

However, the corner saw should be used with caution, since its blade is not designed to penetrate broad or dense materials.

It would barely be effective when used to trim extremely vast or solid stuff.

What Are the Parts of a Corner Saw?

Corner saws are constituted of the following parts:

  1. Blade – The role of the blade is to cut wood. The blade has several teeth, that influence the saw’s momentum and the kind and precision of cut made.

  2. Handgrip – The handle is the part of the corner saw that allows it to be held and navigated using the hand.
  3. Frame – On the corner saw the frame links the blade to the handgrip. The frame has a rectangular shape.

  4. Spring pins ­– These pins are used as fasteners that tighten the position of the frame and blade, making them steady and parallel to each other.

  5. Circular knob -The knob enhances the tension of the blade and sustains the strength of the plank. Therefore, the knob keeps the blade from diverting from the surface being worked on.

How Is a Corner Saw Used?

Below is a set-by-step guideline to follow when using a corner saw.

  1. Position the saw’s blade such that all the blade’s pins are fixed by the spring pin.

  2. The setting in place of the blade should be done in such a way that the blade can function either through pulling or pushing. This is dependent on what you would opt for, as the user.

  3. Turn the handgrip, to regulate the traction, up to the point when the blade is no longer loose.

  4. To begin the trimming process, pull or push the corner saw towards the non-chopping direction, severally.

  5. For the cutting to begin, you now start pushing and pulling the corner saw. Do not forget to keep turning the saw’s blade as you proceed, to keep to the required cut design.

What Are the Elements That Make an Effective Corner Saw?

  1. Frames that are solid and well made.
  2. An intuitive handgrip.
  3. A simple straining structure that remains compact.
  4. Frames that are steady enough to stop the frequent or unnecessary turning by the saw’s blade.

What Is A Corner Saw?

A corner saw is a tool for cutting wood with precise cuts and accuracy. 

The use of a corner saw has a couple of advantages.

Some of these advantages include fast and undemanding setting up process, precise and clean cuts as well as its pocket-friendly price.